Troubleshooting a Hot Water System Failure: What to Do If It Stops Working
Troubleshooting a Hot Water System Failure: What to Do If It Stops Working
Blog Article
Just about every person has got their own thinking about No Hot Water — Water Heater Repair.
Several modern houses take advantage of an electric water heater for their heater, as a result of its ease as well as ease of use. Nonetheless, similar to any other electric home appliances, troubles might arise with its use, suddenly. It can be truly discouraging to wake up to a cold shower instead of a warm one or having your bathroom with water that isn't warm adequate and even too warm. Whatever the situation may be, hot water heater problems can be fairly aggravating. Fortunately, we've made a listing of feasible remedies to your water heater concerns. There are a number of variables that might cause many of these troubles, it could be a concern with the power supply, the electrical burner, or the thermostat. Before doing anything, guarantee you turn off the main power supply for security. Whatever the trouble is, getting it dealt with ought to not present way too much of an issue if you comply with these actions:
Examine Your Power Supply:
As standard as this may seem, it is extremely essential. Without ample power, your hot water heater will not function. So the first thing to do when your water unexpectedly retires is to verify that it isn't a power issue. Inspect if the fuse is blown out or the circuit breaker stumbled. If the breaker is the concern, just turn it off and on again. Replace any broken or damaged fuse. Examine the home appliance with power after these changes to see if it's now working.
Examine the Heating Element in the Hot Water Heater:
If it's not a power issue, then attempt checking out your burner if it is still working. Examine each of your heating elements to be sure the issue isn't with any one of them. If any of them is damaged, change that part and after that check whether the hot water is back on.
Inspect Your Thermostat:
If your water heater still isn't functioning or the water appearing isn't hot enough, you may require to check the temperature settings on your top thermostat. Ensure the circuit breaker is switched off prior to doing anything. Open up the access panel and press the red button for temperature reset above the thermostat. This must aid warm the water. Transform the breaker back on and check if the problem has been dealt with.
Call An Expert:
If after replacing all faulty parts and also resetting your temperature level, the hot water heater still isn't working, you may require to call a professional plumber for an expert opinion. The trouble with your heating unit could be that the hot and cold faucets have actually been switched or it might be undersized for the amount of warm water needed in your home. Whatever the situation may be, an expert plumber would aid resolve the trouble.
Final thought
Hot water heater issues are not constantly major. Most of them are due to minor concerns like a blown fuse or damaged heating element. Replacing the damaged parts ought to do the trick. Nonetheless, if you are still not able to fix the problem, give a call to your local plumber to find to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Hopefully you enjoyed reading our section about What Would Cause My Electric Water Heater to Stop Working?. Thanks so much for spending some time to read our short article. Sharing is nice. You just don't know, you might be helping someone out. We recognize the value of reading our article about How to Troubleshoot and Repair an Electric Water Heater.
Timely fixes available. Report this page